| Design of a Filtering Crossover Based on Circular Patch Resonator |
| Click here to download the full text |
| Citation of this paper: |
| Hits: 368 |
| Download times: 0 |
| Author Name | Affiliation | | ZHANG Gang1,2, ZHANG Qi-yun1, LIU Zheng-kang1, TANG Wan-chun1, ZHANG Xiu-yin2 | 1. Jiangsu Key Laboratory of 3D Printing Equipment and Manufacturing, School of Electrical and Automation Engineering,
Nanjing Normal University,Nanjing 210046,China
2. School of Electronic and Information Engineering, South China University of Technology,Guangzhou 510006,China |
|
| Fund Project:国家自然科学基金重点项目(62031016), 国家自然科学基金面上项目(62171226), 广州市重点研发计划
项目(202103020002) |
| |
| Abstract:This paper proposes a filtering crossover based on circular microstrip patch resonator. The orthogonality of
the degenerate mode TM11A and TM11B in the circular microstrip patch resonator is used to realize the cross transmission of signals.
At the same time, the coupling slots and coupling bridges are introduced between the two circular microstrip patch resonators,
the signal can be efficiently transmitted from one circular microstrip patch filter unit to another, i. e. , cascade the
two circular microstrip patch resonators, so as to realize the filtering function of the filtering crossover. In this design, the isolation
between different transmission channels is achieved by using mode characteristics and rationally arranging input and
output ports. In order to verify the design method, a planar filtering crossover with a 3 dB relative bandwidth of 9. 3% working
at 2. 9 GHz is designed, manufactured and tested. Measured results coincide well with simulated ones, verifying the proposed
design concept. |
| keywords:circular microstrip patch resonator, coupling, filtering crossover, isolation, orthogonality of the degenerate
mode |
| HTML View Full Text View/Add Comment Download reader |
|
|
|
